AMS JUICE DEGAS for fruit juice degassing

High Gravity Blender

HIGH GRAVITY BREWING - HGB

High Gravity Brewing enables a brewery to exploit its resources to the maximum. Additionally, a precise adjustment of the naturally fluctuating wort can be achieved.

Beer treatment occurs extremely gently with our modules. There are neither sintered candles nor dead areas hard to clean, nor are beverages exposed to shear forces. Our systems are robustly designed including the measurement devices, which is especially in faraway regions a benefit. The High Gravity Brewing modules are based on a CIP cleaning concept guaranteeing a high degree of safety regarding mixing, even the CO2 pipe can be CO2 cleaned.

AMS SMART HGB - High Gravity Brewing

Semi-automatic High Gravity Brewing module with reliable and consisten outputh

AMS SMART HGB is an extremely robust and easy to operate system at restricted budget. Rough ambient conditions such as water hammers in the pipework or power failures will hardly cause any damage. The system is precise to eliminate variations of product batches, even the technology is kept simple. The system is implemented according to the expansion stages required. The degassed water could be produced within AMS SMART HGB by adding a small degassing column to the system

AMS SMART HGB is available in 2 standard series for each capacity.

AMS SMART HGB 32 max. 5 m³/h (50 hl/h)
AMS SMART HGB 50 max. 10 m³/h (100 hl/h)

+ QUOTE PLEASE

    How can AMS improve your products?

    AUTOMATION

    Software SolutionsProcess Control SystemsElectrical Systems

    MODULES

    Sugar DissolverSyrup KitchenBeverage MixerProduct DegasserCarbonisatorHigh Gravity BlenderFlash PasteurizerCleaning in PlaceYeast Propagation

    SERVICES

    Planning and EngineeringProject ImplementationOperations SupportMaintenance Services

    The more specific the details,
    the better we fit!

    Please tell us a bit more about you:

    captcha
    Please type in the verification-code above


    AMS AUTO HGB - High Gravity Brewing

    Fully automatic High Gravity Brewing module with low operating cost

    The system regulates the predefined values for the CO2 content, the original wort and the beer colour automatically. The unique design of the dosing technology is the system's unique feature. The components to be dosed are added precisely at the same dosing point for both homeopathic or high dosing rates. There is in principle no competing system which can achieve a higher level of accuracy while being kept clean so easily with CIP cleaning.

    AMS AUTO HGB is available in 6 standard series for each capacity.

    AMS AUTO HGB 32 max. 6 m³/h (60 hl/h)
    AMS AUTO HGB 50 max. 12 m³/h (120 hl/h)
    AMS AUTO HGB 65 max. 23 m³/h (230 hl/h)
    AMS AUTO HGB 80 max. 35 m³/h (350 hl/h)
    AMS AUTO HGB 100 max. 55 m³/h (550 hl/h)
    AMS AUTO HGB 125 max. 86 m³/h (860 hl/h)

    Precision attainable:
    CO2 dosing: +/- 0.05 g/litre deviation from target value CO2 content finished product
    water dosing: +/- 0.1° Plato
    colouring beer dosing: +/- 0.1% deviation from target value colouring beer dosing volume

    AMS CARBO are carbonator for carbonation carbonization of beer and and soft drinks

    Carbonator

    CARBONATION AND BLENDING OF BEVERAGES

    Carbonation of soft drinks, juices water, and beer occurs extremely gently with our modules. The AMS Carbo Blender combines carbonization and blending in one skid-mounted module for optimal high gravity beer production

    There are neither sintered candles nor dead areas hard to clean, nor are beverages exposed to shear forces. CO2 gas is dosed finely inline to the product flow. After this the product finds its way into a special static or dynamic mixer (depending on system type) where CO2 bubbles are separated into fine beads and slightly pressured into the liquid. Carbonation up to 10 g/litre CO2 is attainable depending on the beverage.

    + QUOTE PLEASE

      Please tell us a bit more about you:

      captcha
      Please type in the verification-code above

      AMS EASY CARBO

      Simple and reliable beverage carbonation at low investment cost.

      AMS EASY CARBO is a carbonation device for reliable inline carbonation of soft drinks, beer, water and other beverages. The system essentially consists of a variable area flow meter, a pressure regulator, a needle metering valve for the CO2 gas and a static mixer in the product. The operator sets the value to be dosed for the CO2 precisely subject to the volumetric flow rate of the product. The display on the variable area flow meter is very precise. Carbonation proceeds reliably throughout the production phase with the pre-set value. Operation is straightforward. The only important factors for the operator are knowledge of the product flow rate and shutting off the CO2 feed once production has been completed. AMS EASY CARBO can be incorporated into the CIP cleaning process. In that case, the gas side is disconnected from the product side to make it mix-proof. AMS EASY CARBO is available in 3 standard series for each capacity.

      AMS EASY CARBO 25 max. 3 m³/h (30 hl/h)
      AMS EASY CARBO 32 max. 6 m³/h (60 hl/h)
      AMS EASY CARBO 50 max. 12 m³/h (120 hl/h)

      AMS SMART CARBO

      Semi automatic carbonation with a high certainty of outcome.

      AMS SMART CARBO is an extremely robust and easy to operate carbonation system at restricted budget. Rough ambient conditions such as water hammers in the pipework or power failures will hardly cause any damage. The carbonation system is precise to eliminate variations of product batches, even the technology is kept simple. The dosing is displayed on the variable area flow meter and precisely set on the dosing valve. Initiators trigger an alarm if there is a deviation from the pre-set CO2 dosage quantity. The beverage line is equipped with a flow monitor to provide further security. Changes of flow rates are detected and error signals stop production if required. The pressure in the beverage line is kept exactly at the value intended via a mechanical regulating valve. AMS SMART CARBO is available in 2 standard series for each capacity.

      AMS SMART CARBO 32 max. 6 m³/h (60 hl/h)
      AMS SMART CARBO 50 max. 12 m³/h (120 hl/h)

      AMS AUTO CARBO

      Fully automatic beverage carbonation at low energy costs.

      AMS AUTO CARBO stands for the highest level of precision found in the beverage industry. The carbonation system can be easily connected to a central control or has a record of the operating parameters as a "stand alone" version. The required CO2 content for each beverage is recorded in the recipe editor. The system settles the specified values automatically. An automatic regulating valve is used to keep the beverage pressure at the value which is necessary for dissolving the intended CO2 quantity at the current product temperature. The resultant lower power consumption of the product pump reduces energy costs for the operation.
      Precision attainable: +/- 0.05 g/litre deviation from set point of the finished product AMS AUTO CARBO is available in 6 standard series for each capacity.

      AMS AUTO CARBO 32 max. 6 m³/h (60 hl/h)
      AMS AUTO CARBO 50 max. 12 m³/h (120 hl/h)
      AMS AUTO CARBO 65 max. 23 m³/h (230 hl/h)
      AMS AUTO CARBO 80 max. 35 m³/h (350 hl/h)
      AMS AUTO CARBO 100 max. 55 m³/h (550 hl/h)
      AMS AUTO CARBO 125 max. 86 m³/h (860 hl/h)
      Brewery Maintenance and Brewery Audits by AMS brewey consultants ensure continous production, while increasing your efficiency and KPI´s.

      Maintenance

      MAINTENANCE & AUDIT SERVICES

      Are you running at full capacity and require technical assistance and brewery maintenance support?
      Brewery Maintenance and Brewery Audits ensure continous production, while increasing your efficiency and Key Performance Indicators (KPI).
      Our comprehensive pool of multidisciplinary brewery consultants has enabled AMS to cooperate successfully in more than 30 countries with clients in the beverage industry.

      OUR STRENGTH

      • Careful and comprehensive brewery audits executed in co-operation with the client to identify specific requirements
      • Provision of a continuous technical back-up and spare part service system for the production facilities
      • Development of appropriate concepts for long-term investment programmes and CAPEX planning
      • AMS brewery consultants take a holistic view

      AMS TECHNICAL AUDIT

      Whatever you need, we assign the right brewery consultants to your production site, carefully analysing operations, reviewing production reports, monitoring machines, capturing technical issues and collecting all findings during interviews with operators and maintenance team onsite.
      All data are subsequently processed and summarized within the AMS AUDIT REPORT providing clear maintenance instructions, improvement areas, and project proposals.

      AMS PREVENTIVE MAINTENANCE

      The AMS AUDIT REPORT is the basis for procurement and maintenance. Our support team prepares comprehensive machinery, equipment and spare part proposals which could be sourced via AMS or suitable suppliers. Applicable OEM maintenance procedures will be always considered.
      Once proposed machinery, equipment and spare parts are on site, AMS assigns brewery specialists to implement all measures from the audit report. AMS beverage specialists work closely with your operators and maintenance team to ensure full know-how transfer. Our target is to enable your personnel to become self-sufficient in the medium term.
      We propose to conduct the AMS AUDIT six months prior to end of peak season before peak season. The AMS PREVENTIVE MAINTENANCE TEAM would be scheduled thereafter during low season.

      AMS RAW MATERIAL AUDIT

        AMS brewery consultants conduct in-depth technical audit of
        mechanical conveyors:
      • elevators, screw conveyors, chain conveyors, tubular chain conveyors
      • cleaning machines:
      • screens, drum screens, destoners, air classifiers, magnet units
      • dedusting:
      • filter housings, point-filters, push-in-filters
      • silos:
      • profile walls silos, round silos, textile silos, grist bins, batch hoppers
      • silo accessories:
      • outlet slides, power slides, level indicators, temperature measuring devices, discharge devises, dosing screws, vibration discharge, rotary valves
      • weighing:
      • bulk scales, flow scales, load cells
      • grinding and crushing plants:
      • 2-roller mills, 4-roller mills, 6-roller mills, malt humidification units, hammer mills, lump breakers
      • pipe components:
      • pipes for product run, pipes for dedusting, powder coated, galvanized or stainless steel

      AMS PRODUCTION AUDIT

      AMS brewery consultants conduct in-depth production audit of mash mixer, cereal cooker, lauter tun, mash filter, kettle, whirlpool, wort cooler, hot and cold brewing tanks, trub handling, spent grains handling, heat recovery systems, wort stripping, pumps, piping systems, valves, instrumentation and controls, yeast management, yeast propagation, fermentation and maturation tanks, filtration, bright beer tanks, carbonization, high-gravity blending, CIP systems

      AMS PACKAGING AUDIT

      Whether RGB, CAN, PET or KEG line, the AMS performance test at the filler allows an identification of critical issues impacting the line performance and operation of the plant in general.
      AMS brewery consultants conduct in-depth packaging audit of single-unit conveyors (RGB, CAN, PET) or container conveyors (crates, cartons, trays), depalletizer, decrater, crate rinser, crate washer, bottle washer, empty and full bottle inspector, filler, crowner, crown-cork feeder, tunnel or flash pasteurizer, labeller, coder, crater, palletizer, gravity rinser, packer

      AMS UTITLITIES AUDIT

      AMS brewery consultants conduct in-depth utilities audits of
      • Steam and condensate systems, boilers, deaerators, steam & condensate piping, including control valves, steam traps, vacuum breakers, air vents and condensate return systems.
      • Ammonia refrigeration systems, Reciprocating, twin-screw, mono-screw compressors, variable speed control, condensers CO2 recovery, distribution, storage.
      • Water management from fresh water treatment, water recovery, minimized water consumption, waste water treatment and discharge.
      • Electricity generation, high- medium- and low-voltage distribution, exploring energy saving potentials, minimizing energy consumption.

      AMS PLANT AUDIT

      Taking over an existing plant or rehabilitating a standstill production facility. AMS PLANT AUDIT provides you with an expert opinion of machinery, equipment, process and production. Depending on our assignment we assess all plant departments in detail and even assess processes, existing know-how and procedures.

      + QUOTE PLEASE

        How can AMS improve your products?

        AUTOMATION

        Software SolutionsProcess Control SystemsElectrical Systems

        MODULES

        Sugar DissolverSyrup KitchenBeverage MixerProduct DegasserCarbonisatorHigh Gravity BlenderFlash PasteurizerCleaning in PlaceYeast Propagation

        SERVICES

        Planning and EngineeringProject ImplementationOperations SupportMaintenance Services

        The more specific the details,
        the better we fit!

        Please tell us a bit more about you:

        captcha
        Please type in the verification-code above


        Brewery Maintenance and Brewery Audits by AMS brewey consultants ensure continous production, while increasing your efficiency and KPI´s.

        Operations

        OPERATIONS SUPPORT

        AMS acts as your extended work-bench for your supply-chain department. We help to procure, package, and transport the right materials just in time.
        During peak seasons, only another shift may satisfy your demand? You require a specialized technician on ground for a limited period? Or you want to further educate and train your own personnel?

        STRENGTH OF AMS OPERATIONS SERVICES

        • Continuous application of new and appropriate process technologies under changing project environments
        • Experienced and reliable partner in testing, selection and supply of production inputs
        • Audits and establishment of internal and external production and quality assurance systems
        • General consultancy, management leasing and training programs

        AMS RAW MATERIAL SERVICES

        In procurement size matters, especially in procuring raw materials. AMS bundles requirements of several customers to benefit from economies of scale. We negotiate yearly contracts for your main raw materials, as prices in this sector are extremely unsteady and vary from year to year, always depending on the crop yield.

        AMS SPARE PARTS SERVICES

        With most equipment manufacturers, we cooperate for many years. Our resale-rebates and optimization of packaging and freight charges ensure competitive pricing. AMS clients enjoy only one single point of contact for all requests, complaints, and support calls.

        AMS PERSONNEL AND TRAINING SERVICES

        Personal shortages always come at the wrong time. Vacation, sick-leave, maternity leave, peak season, training, or simply the need for specialized know-how. Whatever it is, we will assign appropriate experts on short notice for an interims periods.
        Educating your technical personnel for your long-term success. A wide range of training programs is available including overseas training in Germany (English language), class-room trainings at your site or trainings-on-the-job. Brewmaster courses, technological classes, laboratory trainings, specific technical trainings for maintenance of valves, motors, pumps, and all other brewing equipment can be arranged.

        AMS QUALITY ASSURANCE

        AMS QA TEAM consists of specialists with in-depth process and production experience in the beverage industry. AMS collaborates closely with German technical universities, beverage research institutes and their training institutions. AMS QA TEAM focusses on your laboratory. Starting with a design and facilities check of your laboratory, AMS examines whether all recommended tests and parameters are in place, if the equipment is properly calibrated and if all test results are documented and distributed to the right person.
        AMS QA TEAM recommends QA software for organized sample processing and for the recording, structuring and evaluation of robust analysis data.

        SERVICE PROFILE EXPECTED BY OUR CLIENTS

        • In-depth process and production experience in the industry
        • Continuous cooperation with leading research institutions
        • A firm position in purchasing markets for raw, auxiliary and packing materials
        • A solid experience in developing and implementation of tailor-made training systems for professional staff
        • Reviewing and optimizing existing production routines
        • Developing new beer recipes
          + QUOTE PLEASE

            How can AMS improve your products?

            AUTOMATION

            Software SolutionsProcess Control SystemsElectrical Systems

            MODULES

            Sugar DissolverSyrup KitchenBeverage MixerProduct DegasserCarbonisatorHigh Gravity BlenderFlash PasteurizerCleaning in PlaceYeast Propagation

            SERVICES

            Planning and EngineeringProject ImplementationOperations SupportMaintenance Services

            The more specific the details,
            the better we fit!

            Please tell us a bit more about you:

            captcha
            Please type in the verification-code above


            Brewery Maintenance and Brewery Audits by AMS brewey consultants ensure continous production, while increasing your efficiency and KPI´s.

            Projects

            PROJECT IMPLEMENTATION

            Our clients have formed and developed our teams and scope of service. Whatever you need it starts with professional Planning and Engineering and once you are ready we implement your project either on turnkey basis (EPC) or as project implementation consultant (EPCM). The professional independence of the AMS team is the main reason, clients share their visions, concepts, and project ideas with us.

            OUR STRENGTH

            • Application of its long and worldwide experience in similar projects.
            • The ability to establish under challenging conditions reliable systems.
            • Provision of guarantees which reduce implementation cost, project risks and completion times.
            • Securing know-how transfer to the clients including the fulfillment of environmental requirements.
            + QUOTE PLEASE

              How can AMS improve your products?

              AUTOMATION

              Software SolutionsProcess Control SystemsElectrical Systems

              MODULES

              Sugar DissolverSyrup KitchenBeverage MixerProduct DegasserCarbonisatorHigh Gravity BlenderFlash PasteurizerCleaning in PlaceYeast Propagation

              SERVICES

              Planning and EngineeringProject ImplementationOperations SupportMaintenance Services

              The more specific the details,
              the better we fit!

              Please tell us a bit more about you:

              captcha
              Please type in the verification-code above


              AMS EPCM CONTRACTOR

              Whether you are planning a greenfield project or a major upgrade of your existing plant, AMS PROJECT TEAM provides the technical foundation for your project success. AMS assumes the role as project implementation consultant for Engineering, Procurement and Construction Management (EPCM). Our specialists work hand-in-hand with your team from kick-off until project commissioning.
              The AMS approach structures each project in logical pieces. AMS actively manages the interfaces between all stakeholders to ensure smooth project implementation. A strict sequential project management methodology, basing each step and activity on predefined processes optimizes efficiency and transparency.

              AMS EPC CONTRACTOR

              You prefer 1 general contractor with 1 contract only? Your in-house resources are overwhelmed with daily activities? The time-to-market for your project is very ambitious? In all these cases, AMS assuming the role as General-EPC-Contractor for Engineering, Procurement and Construction may be just the right solution.
              The integration of all projects works is implemented by one competent multidisciplinary team. The General Contractor approach assures systems reliability and the systems guarantee Implementation cost, risks and time-to-market are reduced.
              The client can focus his resources on general monitoring and special contributions.

              AMS PROJECT GUARANTEE

              Whether you prefer AMS as General Contractor (EPC) or as Project Implementation Consultant (EPCM), our project guarantees always apply. All team partners have constant co-operation partners throughout the project. A comprehensive project information system for an effective technical and commercial project execution control. The continuity of the project management team to secure the highest quality standards and best economic results. A highly professional interdisciplinary project team for all sectors of project investments

              Brewery Maintenance and Brewery Audits by AMS brewey consultants ensure continous production, while increasing your efficiency and KPI´s.

              Engineering

              PLANNING AND ENGINEERING

              Greenfield, Brownfield, AMS ENGINEERING specialized in Anyfield.
              Sales agents ever asking for more products? Expand your production capacities while minimizing effects on current operations, AMS ENGINEERING is leading from behind.
              Headquarters setting new targets to optimize Key Performance Indicators. AMS ENGINEERING identifies technological and technical deficiencies and plans your route to success, if desired alongside with return-on-investment calculation and monitoring system.
              Planning a new brewery or soft drink plant, AMS ENGINEERING is stand-by as your partner through the entire planning cycle starting from Master Planning, to Detailed Planning and finishing with Execution Planning.

              + QUOTE PLEASE

                How can AMS improve your products?

                AUTOMATION

                Software SolutionsProcess Control SystemsElectrical Systems

                MODULES

                Sugar DissolverSyrup KitchenBeverage MixerProduct DegasserCarbonisatorHigh Gravity BlenderFlash PasteurizerCleaning in PlaceYeast Propagation

                SERVICES

                Planning and EngineeringProject ImplementationOperations SupportMaintenance Services

                The more specific the details,
                the better we fit!

                Please tell us a bit more about you:

                captcha
                Please type in the verification-code above


                AMS PLANNING CYCLE

                1. AMS MASTER PLANNING

                ...translates the project idea into a roadmap for the implementation of a production facility, including future expansion options in line with sales projections...

                2. AMS DETAILED PLANNING

                ...is based on the Master Plan. It is finalized with the tender documentation, now ready for circulation to shortlisted suppliers...

                3. AMS EXECUTION PLANNING

                ...is based on the Detailed Engineering and the outcome of the tender. It is finalized with completion of as-built drawings as basis for installation...

                SERVICE PROFILE EXPECTED BY OUR CLIENTS

                AMS ENGINEERING comprehensively evaluates all project parameters and where necessary adapts design elements to local laws and regulation or multinational group requirements. During this stage AMS ENGINEERING works closely with AMS or client architects and civil engineers to synchronize process and machinery design with architectural design.

                • Management of a multi-partner design cooperation as well as the integration of a multi-source machinery package.
                • Knowledge of the markets combined with regional competence.
                • Anticipation of technological changes and market developments.

                STRENGTH OF AMS ENGINEERING

                Project planning can become rather complex. Local laws, different partners, group requirements, civil contractors and a bunch of equipment and machinery manufacturers? Many interfaces but only one integrated automation approach throughout the plant? And everything on time, below budget but over client’s expectations?

                • AMS ENGINEERING as sole planning and design partner for the whole project cycle.
                • Professional independence from individual manufacturers or brands.
                • Application of "state of the art" planning and design techniques and communication systems.
                • A more economic and faster planning cycle.

                Electrical Systems

                AMS ELECTRICAL SYSTEMS

                AMS AUTOMATION starts with electrical planning, design and construction of electrical cabinets, turnkey electrical installations up to commissioning of the plant and maintenance remote or onsite, whatever is required.

                + QUOTE PLEASE

                  How can AMS improve your products?

                  AUTOMATION

                  Software SolutionsProcess Control SystemsElectrical Systems

                  MODULES

                  Sugar DissolverSyrup KitchenBeverage MixerProduct DegasserCarbonisatorHigh Gravity BlenderFlash PasteurizerCleaning in PlaceYeast Propagation

                  SERVICES

                  Planning and EngineeringProject ImplementationOperations SupportMaintenance Services

                  The more specific the details,
                  the better we fit!

                  Please tell us a bit more about you:

                  captcha
                  Please type in the verification-code above


                  AMS E-PLANNING

                  Understanding and using all electrical components, wiring diagram systems, industrial PCs and drives as well as software and touch-screen management. This is the basis for safe and continuous production environment in the beverage industry. AMS diagnostics and replacement service is fast and effective to support your operations.

                  AMS prepares for each project a complete and tailor-made documentation consisting of wiring diagrams, construction drawings, terminal diagrams and bill of quantities.

                  AMS E-CONSTRUCTION

                  The ever-increasing technological progress places high demands on construction, installation, and safety of electrical cabinets and electrical control in the beverage industry.
                  The control cabinets are manufactured by our long-term partners, only components and parts of reputable suppliers are used. All control cabinets are checked by the quality assurance team before they are delivered to customers.

                  AMS E-INSTALLATION

                  Our installation services include supervision, mounting of control cabinets, cabling supports and distribution, and connection of the built-in electrical equipment.
                  All actuators and sensors will be checked and documented by our commissioner. The processes will be commissioned closely together with our process specialists.
                  Sometimes it is more economical to upgrade and modernize existing equipment, that’s what we call Retrofitting. This may be suitable to extend product life cycle, increase production volume or efficiency or comply with new rules and regulations.

                  Process Control Systems

                  PROCESS CONTROL SYSTEMS

                  In Process Control Systems AMS AUTOMATION focusses on Siemens Braumat and Braumat compact. Our process experts work together with programmers and client teams to define functional and technical specification to deliver the program as desired.

                  BRAUMAT COMPACT

                  BRAUMAT compact is ideal for small breweries, individual process areas or subsystems. This process control system is based on the SIMATIC PCS 7 and combines all essential functions for automation, operation, monitoring and engineering. It also features two-stage control logic for recipe control.
                  A full SIMATIC PCS 7 engineering station is available to ensure that hardware and software engineering can be performed quickly with very little effort. WinCC provides convenient operation and monitoring with full functionality, including faceplates, trends and a reporting system

                  BENEFITS AT A GLANCE

                  • Consistently high product quality through standardization of the production processes and automated process pictures
                  • Process optimization through detailed analysis and easy adjustment of the plant and process parameters
                  • Improved plant availability by supporting maintenance and servicing of the plant elements
                  • Cost reduction through automated production processes and information flow

                  AMS and its partners provides all services around Implementation, Upgrading, Extension and Training of the System. Processes will be carefully analysed and functional and technical descriptions form the basis of the system to be commissioned.

                  + QUOTE PLEASE

                    How can AMS improve your products?

                    AUTOMATION

                    Software SolutionsProcess Control SystemsElectrical Systems

                    MODULES

                    Sugar DissolverSyrup KitchenBeverage MixerProduct DegasserCarbonisatorHigh Gravity BlenderFlash PasteurizerCleaning in PlaceYeast Propagation

                    SERVICES

                    Planning and EngineeringProject ImplementationOperations SupportMaintenance Services

                    The more specific the details,
                    the better we fit!

                    Please tell us a bit more about you:

                    captcha
                    Please type in the verification-code above


                    Software Solutions

                    SOFTWARE SOLUTIONS

                    AMS AUTOMATION is specialised in reprogramming and exchange of controls in the beverage industry. We are working with Siemens S5/S7 controls and corresponding visual display systems such as Siemens ProTool, WinCC flexible, TIA-Portal and Siemens WinCC Scada.

                    + QUOTE PLEASE

                      Please tell us a bit more about you:

                      captcha
                      Please type in the verification-code above

                      • AMS tailor’s all software solutions to your machines and your specific requirements
                      • Environment of machine
                      • Hardware requirements and integration of existing hardware
                      • Qualification of operator
                      • Expectations on availability, production data, degree of automation
                      • Remote control options

                      AMS provides extension and retrofitting services for your existing machines.

                      WinCC

                      WinCC (TIA Portal) is the software for all HMI applications ranging from the simplest operation solutions with Basic Panels to SCADA applications on PC-based multi-user systems.
                      SIMATIC WinCC flexible is the predecessor product of WinCC (TIA Portal).

                      Siemens
                      SIMATIC S5/S7 controls

                      Siemens offers the various controllers for a wide range of automation requirements. The SIMATIC range of controllers comprises Basic, Advanced, Distributed, and Software Controllers that offer scalability and integration of their functions. The engineering in the Totally Integrated Automation Portal (TIA Portal) enables optimal automation solutions to be found for every application.

                      Conversion SIMATIC S5 to S7

                      Upgrade your system to the next generation. AMS offers quick and professional conversion to the more powerful SIMATIC S7 control system (incl. control panel) according to Siemens recommendations. Upgrade to newest safety standards. Software development, conversion and machine start-up by experienced service personnel. Process optimization and consulting and continuous technical support for your system.

                      AMS Syrup Kitchen or Syrup Room for the syrup production and syrup preparation of soft drink syrups

                      Syrup Kitchen

                      SYRUP KITCHEN - perfect soft drink factory

                      The Syrup Kitchen is your hub for creating innovative drinks. Highest syrup quality, flexibility in recipe design and preparation of syrup variants. That’s the AMS guarantee. Tasty soft drinks, juice spritzers, juice beverages, alcohol-based cocktails or energy drinks. The choice is yours.

                      For the production of mixed beverages a syrup can be prepared as a primary product. Syrup is made essentially of liquid sugar and flavour. A high quality syrup production should also ensure that the oxygen content of the liquid sugar is reduced. A carbonation of the syrup provides finer resolution of the CO2 in the finished beverage.

                      Our syrup rooms consist of the following components:

                      • Mixing tanks
                      • Syrup routing module
                      • Container station
                      • Dissolver for solids / addition of micro ingredients
                      • Suction lance

                      The syrup production is carried out in a batch mode. If two syrup tanks are used, the syrup can be prepared continuously. The special feature of our syrup room is the unsurpassed perfectly mixed syrup, a lower oxygen content and the pre-carbonation of the syrup. Liquid sugar usually contains a lot of oxygen, depending on the dissolution process.

                      By the addition of CO2 into the circulation line, the oxygen is expelled from the syrup. What remains is a desired pre-carbonation of the syrup. If non-carbonated drinks are produced, then instead of oxygen, nitrogen may be used or there may be no addition of gas.

                      + QUOTE PLEASE

                        Please tell us a bit more about you:

                        captcha
                        Please type in the verification-code above

                        #1. Mixing tanks

                        The mixing tanks are equipped with rotary mixers. With the mixers a perfectly homogeneous mixing result is ensured in a very short time. The addition of gas is also made via the rotary mixers. In the CIP cleaning the rotary mixers act as cleaning heads and provide a perfect cleaning of even the bottom of the upper tank.

                        #2. Routing module

                        The routing module is the function module to which all modules of the syrup room are connected. The control panel is also placed on the routing module. The syrup room is controlled from here.

                        #3. Container station

                        If the beverage ingredients are delivered in IBC containers or 500/1000 litre stainless steel containers, our container station simplifies the handling considerably. The operation takes place at normal working height. The container changing can be done simply without oxygen intake into the syrup. The pump, the measurement devices (mass flow), low level probe and the valves are housed in the container station. All pipes and hoses are completely integrated into the automatic CIP cleaning. The container station can be upgraded with additional spaces.

                        #4. Dissolver

                        For solids / addition of micro ingredients

                        If ingredients are solid, then our dissolver is the optimal choice. Our dissolver is also suitable for adding small amounts of liquid components. The dissolver unit takes care of a homogeneous mixture prior toin front of dosing into the syrup tank.

                        #5. Suction lance

                        If raw materials are supplied in barrels, the barrel content must be removed from the top of the tank. The lance has an integrated water channel. With this the tube content can be applied to the product. The suction pipe is connected to the container station or to the solid solvent.